Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 

 Horn isn't working

Go down 

PostSubject: Horn isn't working   Tue Apr 08, 2014 10:26 am

Hey guys, my inspection is up on my bike and before I take it in I did a once over. I noticed my horn works sometimes, sometimes it is weak, and sometimes it won't sound at all?

What gives? What should i check?
Back to top Go down


PostSubject: Re: Horn isn't working   Tue Apr 08, 2014 11:41 am

first thing I'd check would be the connections down at the horn. spray plenty of wd40, give it a good clean, make sure connectors are on properly, wires intact etc.

also give the horn switch on the handlebar a good cleaning with wd40 and make sure no soil and dirt is in there
Back to top Go down


PostSubject: Re: Horn isn't working   Tue Apr 08, 2014 1:51 pm

Strongly agree on checking all the connections (especially the thumb switch contacts hint hint)  thumb  .

Strongly disagree with using WD40 to clean electrical connections.  It will only displace any immediate moisture, and in short order leave a sticky gummy residue which can/will cause further issues down the line.  Contact cleaner is the tool to use here imnsho.
Back to top Go down
Sponsored content

PostSubject: Re: Horn isn't working   

Back to top Go down
Horn isn't working
Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: General :: WRR/X General Discussion-
Jump to: