Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Do I need a top end rebuild?

View previous topic View next topic Go down 
AuthorMessage
b2jgc

avatar


PostSubject: Do I need a top end rebuild?   Sat Jun 21, 2014 11:50 pm

Hi all
I have a 2008 WRR with 10k kms on it. The first 7 of which where commuting and the last 3 mainly off road.
The bike starts and runs very well and has never let me down. As it's got to 10k I thought I would do a compression test and the results are a little worrying.
The service manual states compression should be around 115 psi. Well I have 75psi dry and 115psi wet indicating that the rings are well worn out.
Just thought I would get some comments as to if I need the have the rings done, if the compression test is sus as the bike runs really well and general consensus.
The bike fully modified with air box, FMF full exhaust, programmer.

Cheers Jon
Back to top Go down
 
Do I need a top end rebuild?
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» K100 Rebuild
» caliper rebuild question
» Buggy rebuild thread....
» rzr front diff. rebuild
» king and link rebuild

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: