Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 help with stock height link measurement

View previous topic View next topic Go down 
AuthorMessage
hughes278




PostSubject: help with stock height link measurement   Fri Oct 31, 2014 9:30 am

Hi guys, so I lowered the rear using this method http://www.wrrdualsport.com/tech-guide/suspension/115-lowering-r2 and now I would like to put my bike back to it's stock height. The problem Is I do not know what that height is because I didn't measure it in advance. Anyone know how far I need to back the linkage out to return it to the correct position?
Back to top Go down
Old Rider

avatar


PostSubject: Re: help with stock height link measurement   Mon Nov 03, 2014 7:21 pm

Check you PM's
Back to top Go down
 
help with stock height link measurement
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» help with stock height link measurement
» Andy's 1992 S10
» Trackmaster II/Parker DT mounted-nearly stock height
» Height issue on truck LQ4 conversion
» Write-Up: Stabillizer (Anti-Sway) Bar Link Upgrade

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: