Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 how to access the tps screws

View previous topic View next topic Go down 
AuthorMessage
michiko




PostSubject: how to access the tps screws   Sat Aug 01, 2015 6:13 pm

How the hell, do you access the the screws for the throttle response sensor? do i have to remove the the throttle body?
Back to top Go down
Jens Eskildsen




PostSubject: Re: how to access the tps screws   Sun Aug 02, 2015 5:37 am

I removed seat and sidepanel, and used a hammer and a punch to "adjust" it, witgout loosening the bolts Shog
Back to top Go down
michiko




PostSubject: Re: how to access the tps screws   Sun Aug 02, 2015 6:00 am

no seriously. where exactly did you rest the punch against.
Back to top Go down
Jens Eskildsen




PostSubject: Re: how to access the tps screws   Sun Aug 02, 2015 12:14 pm

Are you able to find the tps? Its on the right side of the bike, behind the frame.

I have no pictures showing it, and its been some time since I messed with it.

Its held on with 2 screws. I went in to diagnostic mode on the display, to show current position, and then gave it some tabs sideways, and confirming movement on the display. I stopped when max was at about 98 or 99%.

Theres a guide here: http://wr250rforum.forumotion.com/t5568-throttle-on-off-at-idle
Back to top Go down
michiko




PostSubject: Re: how to access the tps screws   Tue Aug 04, 2015 12:10 am

i did try to budge it but it didnt move and i was scared to hit it too hard. it looks really flimsy. how hard did you hit it?
Back to top Go down
Jens Eskildsen




PostSubject: Re: how to access the tps screws   Tue Aug 04, 2015 4:18 am

Just about enough to move it, I've never heard about anyone braking it...

But theres still a guide to show you how to unbolt it properly, it just seemed like too much work for me.


Last edited by Jens Eskildsen on Wed Aug 05, 2015 1:55 pm; edited 1 time in total
Back to top Go down
michiko




PostSubject: Re: how to access the tps screws   Wed Aug 05, 2015 8:10 am

okay after hitting it and trying to gain access to it for hours. ive got it reading 18 97. which contrary to what has been written both figures did not change simultaneously.
Back to top Go down
Sponsored content




PostSubject: Re: how to access the tps screws   

Back to top Go down
 
how to access the tps screws
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Best way to access lower windscreen screws?
» Easy access venue required please
» Round head screws
» Fork Filler Screws
» Front Rotor Screws

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: