Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Fresh '16 wrr

View previous topic View next topic Go down 
AuthorMessage
Apb43




PostSubject: Fresh '16 wrr   Sun Feb 07, 2016 10:53 pm

Just picked up my first wrr. Wanting to lower seat height but can't view the thread on here how to do it, also anybody got a yamalink and or seat???

Thanks
Andy
Back to top Go down
Fiftygrit

avatar


PostSubject: Re: Fresh '16 wrr   Sun Feb 07, 2016 11:21 pm

Drop the front forks in the crowns about 3/4 of an inch, dont go too far, get your book out and you can get about an inch in the rear, soften the rear spring so when you sit on the bike it will have a little more sag, you will be supprised how much lower it will feel, and that is all free. cheer`s
Back to top Go down
Apb43




PostSubject: Re: Fresh '16 wrr   Sun Feb 07, 2016 11:31 pm

Book just has periodic maintenance
Back to top Go down
Apb43




PostSubject: Re: Fresh '16 wrr   Sun Feb 07, 2016 11:32 pm

I'll figure it out I suppose
Back to top Go down
csmart

avatar


PostSubject: Re: Fresh '16 wrr   Mon Feb 08, 2016 9:09 am

Im in northern Indiana, Any good places to ride up your direction?
Back to top Go down
Fiftygrit

avatar


PostSubject: Re: Fresh '16 wrr   Mon Feb 08, 2016 12:59 pm

My book I got with my 2014 shows all the adjustments for the suspension, except dropping the forks in the crowns, theres at least 3 adjustments on the rear shock. If you look on this site I think there is a shop manual you can down load.
Back to top Go down
Apb43




PostSubject: Re: Fresh '16 wrr   Tue Feb 09, 2016 6:17 pm

Yeah I found it in my manual but think I'll still want a yamalink if a guys got one or buy new, I'm a short dude. No riding where I'm at right yet anyway.
Back to top Go down
mcdoudlehopper

avatar


PostSubject: Re: Fresh '16 wrr   Tue Feb 09, 2016 6:29 pm

cheers Finally a new rider from the U.P. cheers Where you located at Bud? I'm in Ishpeming, (Marquette county)
Back to top Go down
mcdoudlehopper

avatar


PostSubject: Re: Fresh '16 wrr   Tue Feb 09, 2016 6:30 pm

WooooooP that was my 500th post! didn't realize wings
Back to top Go down
Apb43




PostSubject: Re: Fresh '16 wrr   Tue Feb 09, 2016 8:06 pm

Northern lower . Marion/McBain ,40 miles south of traverse city
Back to top Go down
mcdoudlehopper

avatar


PostSubject: Re: Fresh '16 wrr   Tue Feb 09, 2016 9:15 pm

Oooh Sorry I seen northern Michigan and thought it was the U.P. Cheers
Back to top Go down
Sponsored content




PostSubject: Re: Fresh '16 wrr   

Back to top Go down
 
Fresh '16 wrr
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Barn fresh FB Plover restore or part out?
» Fresh and waste water in Nuevo 1.
» Fresh water pump
» Fresh water inlet pipe. (Symbol)
» Fresh Water Filling Problem

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: General :: New Members-
Jump to: