Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Upgrades and 0-60 times

View previous topic View next topic Go down 
AuthorMessage
TheGreen1




PostSubject: Upgrades and 0-60 times   Tue Jun 21, 2016 12:28 am

I wanted to share my experience with a couple of performance mods. I have a 2008 WRR with stock gearing. Modes are Q4 exhaust, pc v with a map I downloaded from here. I have also opened up the airbox with 1/2" holes in the airbox door.

From my Butt Dyno, I feel like the bike rev's quicker and feels like it has more power. Other changes I have noticed; I can now hit rev limiter in the 3rd and 4th gear. The biggest difference is that 6th gear is actually usable. My opinion is that 6th gear feels like it has the pull of 5th gear without the mods.

Now for the data. According to Cycle World, 0-60 for the WRR is 6.7 seconds. Using my iPhone with CT Speedometer Lite I made a couple of passes using the 0-60 timer. The best run was 4.3 and the worst was 6.0 seconds. The 4.3 second run felt the best, I thought I was good on my shifts and hit the rev limiter in 3rd just after 60. The 6.0 second run didnt feel good, I hit the rev limited in 1st and 2nd, and shifted into 4th too early.

Just my experience, and one more data point to consider when thinking about changes
Back to top Go down
 
Upgrades and 0-60 times
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Upgrades and 0-60 times
» R56 Speaker Upgrades??
» Factory 0-60 & 1/4 miles times
» Jimmers article in Sunday Times
» NY Times article on GPS watches

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: General :: WRR/X General Discussion-
Jump to: