Welcome to the WRR/X Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  Latest imagesLatest images  SearchSearch  RegisterRegister  Log inLog in  
WR250R/X Forum

 

 Rear XCMH (or AC10) + tubliss

Go down 
2 posters
AuthorMessage
Shakes





Rear XCMH (or AC10) + tubliss  Empty
PostSubject: Rear XCMH (or AC10) + tubliss    Rear XCMH (or AC10) + tubliss  EmptyMon Aug 22, 2016 10:36 pm


Has anyone had experience with this combo? I've currently got an AC10 front which I'm happy enough with.

I ride 50% Gravel / 25% Rock and mud / 25% asphalt.
The D606 rear doesn't hookup off-road for me in mud even at 10psi. Rock it's not terrible.
Hoping one of those tires with tubliss will let me run ~6psi off-road and 18 on giving me a better balance. I know I'll sacrifice a little (maybe a lot?) of wear.
Back to top Go down
Shakes





Rear XCMH (or AC10) + tubliss  Empty
PostSubject: Re: Rear XCMH (or AC10) + tubliss    Rear XCMH (or AC10) + tubliss  EmptyThu Aug 25, 2016 5:05 pm

Bit the bullet and ordered them.

Will report back in a couple months.
Back to top Go down
Biglake





Rear XCMH (or AC10) + tubliss  Empty
PostSubject: Re: Rear XCMH (or AC10) + tubliss    Rear XCMH (or AC10) + tubliss  EmptyFri Aug 26, 2016 8:59 am

I'm sure those tires will work good with tubliss, they both have stiff sidewalls which is what works best with the tubliss system.

I've run both of those tires years ago but with tubes, they will work better with tubliss and 6-8 psi than with a tube and 12 psi for sure, I found them a little too stiff which is why I run something different now.
Back to top Go down
Shakes





Rear XCMH (or AC10) + tubliss  Empty
PostSubject: Re: Rear XCMH (or AC10) + tubliss    Rear XCMH (or AC10) + tubliss  EmptyWed Aug 31, 2016 8:01 am

Decent workout to fit it.... That damn get the rim inside the tire bit made me swear just a little.

It's sitting overnight to see if it holds, if not I'll put a couple cups of stans in and attempt to balance it in a day or two.

Won't get a chance to ride it for a couple of weeks.
Back to top Go down
Shakes





Rear XCMH (or AC10) + tubliss  Empty
PostSubject: Re: Rear XCMH (or AC10) + tubliss    Rear XCMH (or AC10) + tubliss  EmptyFri Sep 30, 2016 6:29 pm

First proper ride on it...

The XCMH turns in a lot quicker on road, and the tubliss feels almost 'flat' in MTB terms I'd describe it as supple.

Off-road at 8psi no flats, no pinches, no spun tire, grip for days compared to the 606.

Happy with my choice.

Rear XCMH (or AC10) + tubliss  Image10


Back to top Go down
Sponsored content





Rear XCMH (or AC10) + tubliss  Empty
PostSubject: Re: Rear XCMH (or AC10) + tubliss    Rear XCMH (or AC10) + tubliss  Empty

Back to top Go down
 
Rear XCMH (or AC10) + tubliss
Back to top 
Page 1 of 1
 Similar topics
-
» Tubliss D606 Rear: So Far, So Good
» Pirelli XCMH?
» Michelin AC10
» Michelin AC10 question...
» Michelin ac10 review

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: Tires-
Jump to: