Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Fitting a WR250R front wheel - on a CRF fork

View previous topic View next topic Go down 
AuthorMessage
Two times

avatar


PostSubject: Fitting a WR250R front wheel - on a CRF fork   Tue Jan 31, 2017 6:00 am

Hi,

Is there any way to fit a wr250r front wheel (with 17mm axle diameter) -> on a Honda CRF forks?? (CRF forks designed to normally accept an axle of 20mm... and also the on CRF the speedometer is from the front wheel)

( I have seen that KTM makes adapters that you can stick into your 26mm forks in order to use a 20mm axle/wheel: http://www.ktm-parts.com/SXS03540400.html )

But in my case as I said: I need to fit a 17mm axle/wheel on a 20mm forks...

Can someone please help me with an idea how to solve this?
or maybe a specific product (like the aforementioned KTM adapter) that will fit my needs?
Back to top Go down
Jens Eskildsen




PostSubject: Re: Fitting a WR250R front wheel - on a CRF fork   Tue Jan 31, 2017 8:10 am

New Bearings in the hub, with 20mm inner diameter should make the axle fit the wheel itself.

You would probably still need spaccers ect to make the width of the wheel, fit between the forks.
Back to top Go down
rsteiger

avatar


PostSubject: Re: Fitting a WR250R front wheel - on a CRF fork   Tue Jan 31, 2017 8:39 am

Two times wrote:
Hi,

Is there any way to fit a wr250r front wheel (with 17mm axle diameter) -> on a Honda CRF forks?? (CRF forks designed to normally accept an axle of 20mm... and also the on CRF the speedometer is from the front wheel)

( I have seen that KTM makes adapters that you can stick into your 26mm forks in order to use a 20mm axle/wheel: http://www.ktm-parts.com/SXS03540400.html )

But in my case as I said: I need to fit a 17mm axle/wheel on a 20mm forks...

Can someone please help me with an idea how to solve this?
or maybe a specific product (like the aforementioned KTM adapter) that will fit my needs?

Why in the world would you want to do this?

I am assuming you are not talking the CRF250L forks.
Back to top Go down
Sponsored content




PostSubject: Re: Fitting a WR250R front wheel - on a CRF fork   

Back to top Go down
 
Fitting a WR250R front wheel - on a CRF fork
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Removing front wheel from 4V RS?
» K1100lt front wheel with nearly new discs
» Front wheel bearings
» Front wheel bearings.
» # spoke K75 front wheel

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: General :: WRR/X General Discussion-
Jump to: