Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 13t/47t/112L Chain

Go down 
AuthorMessage
onesaintsfan




PostSubject: 13t/47t/112L Chain   Wed Aug 23, 2017 6:26 pm

As expected low end response is great. 1st gear is a wheelie machine.  2nd and 3rd gear will be great off-road. 4th is good. 5th and 6th she screams.
The downside is you lose 12mph off top speed and the speedometer is way way off.  I ordered a speedhealer to address that.  Ill program it after I put the D606 tires on it.
Install went well.  I have a 14t front on hand.  The 112L chain will accomodate both setups.  I have a big dual sport ride coming up in a month. so will stick with this setup.  Have full FMF exhaust installed so with this mod and the FMF this little bike rips!!!
Back to top Go down
csmart

avatar


PostSubject: Re: 13t/47t/112L Chain   Thu Aug 24, 2017 8:46 am

I ran the same setup, 13/47 then changed to 14 front.
Back to top Go down
 
13t/47t/112L Chain
Back to top 
Page 1 of 1
 Similar topics
-
» Chain in place of belt.
» Rigging up a rope and chain to grid
» the third letter from the last -- word chain by drawing
» 3spd Gearbox pulley & chain what speeds are these good till?
» Lift or lower Murray chain drive?

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: Sprockets and Chains-
Jump to: