Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 

 Attitude Box - Gen 3.2 EFI Controller

Go down 

PostSubject: Attitude Box - Gen 3.2 EFI Controller   Fri Nov 03, 2017 7:38 pm

Alright, I'm taking the plunge, time to do the performance mods on both mine and my wife's 2017 WRR's... Decided on the Attitude Industries Gen 3.2 programmer. So my setup will be:

FMF Megabomb
Graves EXUP Eliminator
Graves AIS Block off plate
Airbox flapper mod
NoToil air filter

Undecided at this point on doing further airbox mods, but leaning towards just the flapper.

Anyone else running this programmer with a similar setup that can give me any pointers on the best settings?

Back to top Go down
Attitude Box - Gen 3.2 EFI Controller
Back to top 
Page 1 of 1
 Similar topics
» The 411 on the MSD Charge FI Controller for the Kawasaki Teryx
» A look at TWCO's Air Controller
» Warm ESC
» Hobbywing ESC
» Advice on drifter float fishing

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: Pipes 'n Programmers-
Jump to: