Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Stock light and signal functionality

Go down 
AuthorMessage
jamiemm18




PostSubject: Stock light and signal functionality   Mon Apr 02, 2018 9:45 pm

I didn't want to bother you folks again so I searched the shop manual, owners manual and the internet but couldn't find what I was looking for. I just want to know if my lights are working properly. The front turn signal are on solid - all the time, like marker lights in a car, but the rears are not at all unless the directionals are in use. All lights and directionals are working fine but I thought it was strange that the front blinker lights are on solid all the time but the rears are not. If I use a directional, the opposite front signal light goes off so the directional can be seen better. So the front yellow lights are always on, unless a directional is being used in which case the opposite side is off. The rear signals only come on at all when being used to signal a turn. Does this sound right? Thanks.
Back to top Go down
mostexcellentdude

avatar


PostSubject: Re: Stock light and signal functionality   Mon Apr 02, 2018 11:12 pm

jamiemm18 wrote:
I didn't want to bother you folks again so I searched the shop manual, owners manual and the internet but couldn't find what I was looking for. I just want to know if my lights are working properly. The front turn signal are on solid - all the time, like marker lights in a car, but the rears are not at all unless the directionals are in use. All lights and directionals are working fine but I thought it was strange that the front blinker lights are on solid all the time but the rears are not. If I use a directional, the opposite front signal light goes off so the directional can be seen better. So the front yellow lights are always on, unless a directional is being used in which case the opposite side is off. The rear signals only come on at all when being used to signal a turn. Does this sound right? Thanks.

That's correct. Same on my bike.
Back to top Go down
YZEtc

avatar


PostSubject: Re: Stock light and signal functionality   Tue Apr 03, 2018 3:49 am

Normal for most street bikes for conspicuity (to make it easier to see the bike coming down the road).
As you wrote:
Like marker lights on a car.
Back to top Go down
jamiemm18




PostSubject: Re: Stock light and signal functionality   Tue Apr 03, 2018 8:56 am

Thank you. Thats what I figured but I was surprised the front directional act as marker lights but the rears do not. My only guess for the inconsistency would be they want the rear brake light to be as noticeable as possible. Maybe with the rear marker lights on it wouldn't be as prounounced but with the rear end dark (aside from the tail light and license plate light, it stands out more when the brake light comes on..
Back to top Go down
Sponsored content




PostSubject: Re: Stock light and signal functionality   

Back to top Go down
 
Stock light and signal functionality
Back to top 
Page 1 of 1
 Similar topics
-
» First Light - BBC2, Tuesday the 14th, 9:00pm
» 450 Stock Muffler
» xentech hid light kit
» Unstable ground signal noise around ant nests
» WTB STOCK RZR SEATS

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: General :: WRR/X General Discussion-
Jump to: