Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 is there supposed to be a header washer/gasket ???

View previous topic View next topic Go down 
AuthorMessage
Midnite171

avatar


PostSubject: is there supposed to be a header washer/gasket ???   Wed Apr 20, 2011 4:50 pm

I installed my Powerbomb header (and Q4) a couple weeks ago and when I took my stock header off, there was no washer between the header and the engine. Is that right? And the Powerbomb didn't come with one either. So, I just used some high temp silicone. Seems to work fine but I just read somewhere that there should have been a washer or gasket or something. Did I miss something????
Back to top Go down
motokid
Moderator
avatar


PostSubject: Re: is there supposed to be a header washer/gasket ???   Wed Apr 20, 2011 5:11 pm

go here <-- clicky


Download the service manual.
It looks to me like a gasket should be there.

Are you sure it's not just "stuck" on the cylinder head?


_________________
2008 WR250X
Gearing: 13t - 48t
Power Commander 5 / PC-V
Airbox Door Removed - Flapper glued - AIS removed
FmF Q4
Bridgestone Battlax BT-003rs
Back to top Go down
mattf




PostSubject: Re: is there supposed to be a header washer/gasket ???   Wed Apr 20, 2011 7:16 pm

motokid wrote:
go here <-- clicky


Download the service manual.
It looks to me like a gasket should be there.

Are you sure it's not just "stuck" on the cylinder head?


there should be one and that was my guess as well that is was stuck to the stock header or the head when you pulled the stock exhaust off.
Back to top Go down
Sponsored content




PostSubject: Re: is there supposed to be a header washer/gasket ???   

Back to top Go down
 
is there supposed to be a header washer/gasket ???
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» is there supposed to be a header washer/gasket ???
» WTB 4ac header
» Parts washer fluid
» should I wrap or coat my header pipe?
» Wtb, 4ac Header, MSD Coil, 6a, Weber adapter plate?

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: Pipes 'n Programmers-
Jump to: