Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Tork for fork

View previous topic View next topic Go down 
AuthorMessage
FG250WRR

avatar


PostSubject: Tork for fork   Tue Jun 21, 2011 3:33 am

Hi Fans of the super super bike
Somebody know tork for fork ?
Back to top Go down
YZEtc

avatar


PostSubject: Re: Tork for fork   Tue Jun 21, 2011 7:15 am

Come again??? scratch
Back to top Go down
FG250WRR

avatar


PostSubject: Re: Tork for fork   Tue Jun 21, 2011 7:41 am

YZEtc wrote:
Come again??? scratch

?????? scratch
To be more clear: Torque on the "tes" of fork to keep the fork Fourgs
Back to top Go down
FG250WRR

avatar


PostSubject: Re: Tork for fork   Tue Jun 21, 2011 7:51 am

FG250WRR wrote:
YZEtc wrote:
Come again??? scratch

?????? scratch
To be more clear: Torque on the "tes" of fork to keep the fork Fourgs

mor more clear maybe good question it's :Torque on the triple clamps to hold a fork
sick
Back to top Go down
craigq

avatar


PostSubject: Re: Tork for fork   Tue Jun 21, 2011 5:12 pm

Lower bracket pinch bolt
20 Nm (2.0 m•kg, 14 ft•lb)

Upper bracket pinch bolt
23 Nm (2.3 m•kg, 17 ft•lb)


http://wr250rforum.forumotion.com/t516-torque-s-for-bike
http://wr250rforum.forumotion.com/t2540-wrr-wrx-electronic-service-manual
Back to top Go down
FG250WRR

avatar


PostSubject: Re: Tork for fork   Wed Jun 22, 2011 3:12 am

craigq wrote:
Lower bracket pinch bolt
20 Nm (2.0 m•kg, 14 ft•lb)

Upper bracket pinch bolt
23 Nm (2.3 m•kg, 17 ft•lb)


http://wr250rforum.forumotion.com/t516-torque-s-for-bike
http://wr250rforum.forumotion.com/t2540-wrr-wrx-electronic-service-manual

thumb
Back to top Go down
Sponsored content




PostSubject: Re: Tork for fork   

Back to top Go down
 
Tork for fork
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Fork Tube Rubber Boot for LT , are they really necessary?
» fork oil capacity confusion
» Ideas for "dressing up"standard fork ?
» USD fork swap on XRR
» Fork length..

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: