Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Torque #'s for Bike

View previous topic View next topic Go down 
AuthorMessage
mx284

avatar


PostSubject: Torque #'s for Bike   Sat May 23, 2009 3:33 pm

the most common nut torque #'s....here Are the ones from the serv. manual

Front End
Front Axle nut.............63Nm/46ft-lbs
Front Axle pinch bolts...23Nm/17ft-lbs
Fork Bolts Upper..........23Nm/17ft-lbs
Fork Bolts Lower..........20Nm/14ft-lbs
Brake Caliper...............23Nm/17ft-lbs

Rear End
Rear Axle nut..............125Nm/90ft-lbs

Fluids
Coolant Drain bolt........10Nm/7ft-lbs
Oil Bleed Bolt...............10Nm/7ft-lbs
Oil filter bolts...............10Nm/7ft-lbs
Oil Drain bolts.............. 20Nm/14ft-lbs
Spark plug...................13Nm/9ft-lbs

Suspension
Swing Arm Nut..............85Nm/62ft-lbs
Relay arm(swingarm)......70Nm/51ft-lbs
Upper Shock.................40Nm/29ft-lbs
Lower Shock9relay arm)..53Nm/38ft-lbs
Connection Rod(frame).....80Nm/58ft-lbs
Connection Rod(relay arm)..80Nm58ft-lbs


Last edited by mx284 on Wed May 27, 2009 3:38 am; edited 1 time in total
Back to top Go down
SoCalCodyKid




PostSubject: Re: Torque #'s for Bike   Sun Nov 24, 2013 11:40 am

Thank you sir!
Back to top Go down
wristpin




PostSubject: Re: Torque #'s for Bike   Fri Aug 22, 2014 4:18 pm

Front sprocket nut-69 ft/lbs
Back to top Go down
moving violation




PostSubject: torque spec   Sat Jan 10, 2015 1:00 pm

Hi, I was wondering if anyone knows the torque spec for the cam carrier and the valve cover bolts for the wr250r. thanks
Back to top Go down
Lillriko




PostSubject: Re: Torque #'s for Bike   Sun Mar 29, 2015 2:58 pm

Rear sprocket bolts 25ft lbs.
Back to top Go down
Sponsored content




PostSubject: Re: Torque #'s for Bike   

Back to top Go down
 
Torque #'s for Bike
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Torque #'s for Bike
» Brembo F08 brake caliper bolt torque
» My bike won't start either...
» Bike will not start (fuel injector, fuel pump, HALL)
» Back to "bike will not start"

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: