| Welcome to the WRR/X Forum A place to share your passion for the WR250R/X! |
| | What's the best setting- FMF PP | |
| | Author | Message |
---|
DanLap
| Subject: What's the best setting- FMF PP Tue Apr 19, 2011 8:23 pm | |
| There are my mods:
Airbox flap removed AIS removed Stock exhaust with spark arrester removed and bigger end K&N air filter 12/43 sprocket
Alt: 150Meters ASL (Québec city)
And i just bought a FMF power programmer and i would like to know if one of you riding same mods and what is the best setting??
Shewolf: I think you used to ride same mods a few time before change stock exhaust? If i'm right, what were your setting??? | |
| | | SheWolf Alpha Rider
| Subject: Re: What's the best setting- FMF PP Tue Apr 19, 2011 11:28 pm | |
| 1.5, 2.5, 1.0, 8.0, 4.0, 4.5 Try starting with that, you should notice a decent feel to it. _________________ A wolf's voice echoed down the mountain 'Share the bounty of the hunt with your brothers and sisters, and forever be strong and free.' | |
| | | DanLap
| Subject: Re: What's the best setting- FMF PP Tue May 03, 2011 10:05 pm | |
| Thanks!! SheWolf
I'll get my FMF PP tomorrow( arrived today at the post office), there is anything that i should know about installation( Special tips)? Because, what i had read, it's seem to easy to install.
Do i need extra parts that is not in the FMF PP package?
I'll give feedback once it will be done. | |
| | | SheWolf Alpha Rider
| Subject: Re: What's the best setting- FMF PP Tue May 03, 2011 10:25 pm | |
| You should be fine with what comes in the kit; the only thing I can give you a heads up on is the connector between the FI and the PP. On the FMF it is REALLY tight. Some guys have actually cut some of that rubber boot away so it would actually 'snap' together. You might get lucky and it snaps together fine, so here's to hoping you get an easy one. _________________ A wolf's voice echoed down the mountain 'Share the bounty of the hunt with your brothers and sisters, and forever be strong and free.' | |
| | | DanLap
| Subject: Re: What's the best setting- FMF PP Wed May 04, 2011 7:34 pm | |
| Alright! Try this soon and i'll post feedback. Thanks for your advice. | |
| | | IAmABug
| Subject: Re: What's the best setting- FMF PP Wed Jan 11, 2012 1:39 am | |
| Will these settings work For any aftermarket pipe as well? | |
| | | motokid Moderator
| Subject: Re: What's the best setting- FMF PP Wed Jan 11, 2012 6:25 am | |
| - IAmABug wrote:
- Will these settings work For any aftermarket pipe as well?
Don't be shy about experimenting. Noodle around a bit. Try something new. _________________ 2008 WR250X Gearing: 13t - 48t Power Commander 5 / PC-V Airbox Door Removed - Flapper glued - AIS removed FmF Q4 Bridgestone Battlax BT-003rs
| |
| | | IAmABug
| Subject: Re: What's the best setting- FMF PP Sun Feb 12, 2012 8:35 pm | |
| Here is a question to all those that have a FMF PP. what and why have you came to these settings. I see lots of posts about what settings are being run, but no reasons as to why you ended up there. | |
| | | Sponsored content
| Subject: Re: What's the best setting- FMF PP | |
| |
| | | | What's the best setting- FMF PP | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |
|