Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum
Share | 
 

 KTM 690 Enduro Flyscreen

View previous topic View next topic Go down 
AuthorMessage
Rapid Dog




PostSubject: KTM 690 Enduro Flyscreen   Mon Apr 23, 2012 5:59 pm

Alotaya asked about my windshield so here yas goes.

Used a KTM 690 Enduro Touring screen:
http://www.ktm-parts.com/76508065000.html
($69) and a couple screws and also a kit from Motorcycle Superstore called a Polisport handguard kit:
($4.99)
http://www.motorcycle-superstore.com/2/9/192/39298/ITEM/Polisport-Shield-Handguard-Mount-Kit.aspx
Screwed it onto the stock number plate and propped it up at the angle I want with some parts from the Polisport kit.
Note that I made the crossbrace etwwen the two posts out of 3/8" aluminum stock to mount the GPS, but ot's not necessary.

This worked well for me because I have the Highway Dirtbike handguards and top clamp.
Also I have a below the clamp Scott's stabilizer.
I suspect with a little 'merikin ingenuity you can figure something out similar, with or without the clamp, etc.

Verdict,in this config, the windshield works great, even wearing my Arai XD3 lid with the visor.
Love it when things I make work out... wings

Pics Dudes and Dudettes...











Back to top Go down
 

KTM 690 Enduro Flyscreen

View previous topic View next topic Back to top 
Page 1 of 1

 Similar topics

-
» Usapang Mataas (enduro or motard) na XRM
» KTM 690 Enduro Flyscreen
» U see this new Joe Rocket enduro/dual sport/hybrid helmet?
» 2011 SNow Run Enduro
» Fly Enduro Jacket

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: Sweet Mods & Bike Accessories-