Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 same axle on wrr and wrx?

View previous topic View next topic Go down 
AuthorMessage
nahoj

avatar


PostSubject: same axle on wrr and wrx?   Wed Feb 20, 2013 10:40 am

hello guys, i'm gonna buy axle sliders on ebay, but they are for x models.

i ask the guy and he asked me:
Could you measure the spindles, and then i could see if they're the same as the x model?

so i'm asking myself about the axle, is it the same for X and R

i find this on the service manual:

Front wheel
Wheel type Spoke wheel
Rim size WR250R 21x1.60
WR250X 17M/C x MT3.00
Rim material Aluminum
Wheel travel 270.0 mm (10.63 in)
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 2.0 mm (0.08 in)
Wheel axle bending limit 0.50 mm (0.02 in)

Rear wheel
Wheel type Spoke wheel
Rim size WR250R 18x2.15
WR250X 17M/C x MT4.00
Rim material Aluminum
Wheel travel WR250R 270.0 mm (10.63 in)
WR250X 265.0 mm (10.43 in)
Radial wheel runout limit 2.0 mm (0.08 in)
Lateral wheel runout limit 2.0 mm (0.08 in)
Wheel axle bending limit 0.50 mm (0.02 in)

i don't speak very well english, i need your help!!

thanks
Back to top Go down
YZEtc

avatar


PostSubject: Re: same axle on wrr and wrx?   Wed Feb 20, 2013 6:51 pm

They're the same axles, at least in the US of A.
Check an on-line Yamaha parts catalogue over there and compare part numbers.
Back to top Go down
 
same axle on wrr and wrx?
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Right Rear 06 Rhino 660 axle
» 2005 Tandem Axle Trailer Reduced
» Need Rear Drivers Side Axle with CV Joints -- 2005 Rhino
» broken gorilla axle
» 2010 S Rear Axle Problem

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: