Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 Identifying unused electrical connectors

View previous topic View next topic Go down 
AuthorMessage
Gregarious




PostSubject: Identifying unused electrical connectors   Sun Sep 29, 2013 5:12 pm

I just bought a used 2008 and was giving it a good once-over to check everything and learn the bike. I found two unused electrical connectors and was wondering if anyone knows what their purpose might be. I've checked the fiche and couldn't identify them. Does anyone know what they're for?

This first one is zip tied to the bracket under the rectifier. It's kind of dull turquoise:

Close up:

The second is under the seat. It's prop'ed up by the blue rag:


They were caked with dirt so I just cleaned them up and covered them with electrical tape.
Back to top Go down
motokid
Moderator
avatar


PostSubject: Re: Identifying unused electrical connectors   Sun Sep 29, 2013 6:11 pm

That's left-over crap from AIS and Flapper removal.


_________________
2008 WR250X
Gearing: 13t - 48t
Power Commander 5 / PC-V
Airbox Door Removed - Flapper glued - AIS removed
FmF Q4
Bridgestone Battlax BT-003rs
Back to top Go down
Gregarious




PostSubject: Re: Identifying unused electrical connectors   Sun Sep 29, 2013 11:35 pm

motokid wrote:
That's left-over crap from AIS and Flapper removal.

Thanks!
Back to top Go down
Sponsored content




PostSubject: Re: Identifying unused electrical connectors   

Back to top Go down
 
Identifying unused electrical connectors
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Installation of electrical connector for tail light assembly
» Jury-rigged starter bypass electrical problems
» Better Electrical Connectors
» Infrared Thermometer - neat troubleshooting gadget!
» Dielectric Grease?

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: