Will a WR-F or YZ wheel fit?

I may need a new front rim after having an argument with a tree and I'm thinking of hitting some local wreckers.

Anyone know if other yamaha fronts will fit a WRR or is something different?

Nope...our hubs are different.

is there any other wheels that will fit our bikesm motard or dirt aside from specific WRR or X ones?

You can get Forrest at Wheeling Cycle to build you a set. He's done quite a few of them for our bikes.

Unless you're into custom machined spacers, brake brackets, etc. Your only options are Yami WR250 R/X parts or Forest at Wheeling.
I got a set of dirt wheels from him. They seem good and bolt right up.

Also note that the hubs are different between the R and the X.

Are you guys totally sure? I have been in contact with a person over at TT who "parts out bikes for a living" and swears that all Yami dirt bike hubs from 1999 on are the same...

He's full of shit...sorry. Our bikes have differnt hubs than any other Yamaha.

SheWolf wrote:

He's full of shit...sorry. Our bikes have differnt hubs than any other Yamaha.

Thanks. Will be very difficult then to find a second set of wheels used...

ZED wrote:

....or Forest at Wheeling....They seem good and bolt right up.

picard wrote:

... Will be very difficult then to find a second set of wheels used...

Used, maybe. Just wait.

New...
Uhhhhhh...... STOP...LOOK...LISTEN......

http://www.wheelingcyclesupply.com/shop?action=category&cat_id=119

PooTeeTat wrote:

http://www.wheelingcyclesupply.com/shop?action=category&cat_id=119

Yes I have had email correspondence with Forrest and I do like his dirt wheel setup. This is what I will do if I don't find anything used.
However, as you surely know, Forrest's setup will be $1100+ by the time it's got brake disks and sprocket on there.
But they sure are nice.
http://www.wheelingcyclesupply.com/images/Qtiy8Qyh0ngAAFsCNe8AAAAO-36194.jpg

picard wrote:

PooTeeTat wrote:

http://www.wheelingcyclesupply.com/shop?action=category&cat_id=119

Yes I have had email correspondence with Forrest and I do like his dirt wheel setup. This is what I will do if I don't find anything used.
However, as you surely know, Forrest's setup will be $1100+ by the time it's got brake disks and sprocket on there.
But they sure are nice.
[url=http://www.wheelingcyclesupply.com/images/Qtiy8Qyh0ngAAFsCNe8AAAAO-36194.jpg

http://www.wheelingcyclesupply.com/images/Qtiy8Qyh0ngAAFsCNe8AAAAO-36194.jpg[/quote[/url]]

I Had Forrest build my front and had Jason at Warp9 do the back. Saved about $400

Forrest supplied everything, as I asked, including rotor and spacers and left off the tire.
Jason at Warp 9 supplied the Sprocket and Rotor but no spacers(he did goof up on the rotor size the first time though, which has since been corrected)

http://www.supermotojunkie.com/showthread.php?t=95982&highlight=cheep

this was what i did.early suziki bolt on,just not the brake so a swap will be needed unless you can get a yam caliper bracket.

picard wrote:

Are you guys totally sure? I have been in contact with a person over at TT who "parts out bikes for a living" and swears that all Yami dirt bike hubs from 1999 on are the same...

The person at TT is talking about wr/f and yz/f models,NOT the X and R models.,they are diferent, ,front possibly ( if 22mm ) and new spacers are used, rear unlikely as all pre 09 wr/f+yzf have a 22mm rear axle ,and more importantly i think the 09+ hubs are narrower,

the rear is 6mm wider on an r/x,