I wanted to make my
q4 quieter so I did this to the baffle.
I basicly copied the hindle quiet core design I bought for a hindle pipe I had on another bike.
I cut out the sa screen as we dont need them in canada and I dont want to have to remove and clean it once and awhile. If your some wheres you do need one you can do this and leave it alone.
I welded a washer over the end of the baffle then drilled the center of the washer out to 3/4 of an inch, then I drilled 8 3/8 holes in the sides of the baffle as some exhaust flows around it, this helps flow without adding more noise.
Its quite a bit
quieter and the bike bikes seams to run exactly the same.