YZ (titanium) pegs on a WR

So I heard that the factory titanium pegs off of a newer YZ would fit the WR..

I found a set on ebay for about $35 shipped. The ones I bought are from an 01 YZ426F. Installed them on the bike today.. What a difference on feel under my feet.. Cause I ride in skate shoes, always felt like the stock pegs were too small, but these sure helped that feeling.

I'll post pics once I take some.

Pete

Agreed, though I don't ride in shoes. Boots at a minimum.

At any rate, they are an improvement in feel, and lighter to boot!

Reviving old thread. Which YZ/WRF pegs fit? Unable to find a clear answer to that.

How about YZ125/YZ250/YZ250F/YZ450F 05-07?

Specifically interested in:
5XE-27411-01-00
5XE-27421-01-00

k1322 wrote:

Reviving old thread. Which YZ/WRF pegs fit? Unable to find a clear answer to that.

How about YZ125/YZ250/YZ250F/YZ450F 05-07?

Specifically interested in:
5XE-27411-01-00
5XE-27421-01-00

I don't have experience with the specific pegs you mention above, but I do know that the peg "fit kit" I purchased with my Fastway pegs works on the models you mention and with the WRR/X.

If interested click this Fastway link and then go to the "details" tab on their web page for a fitment list.  It looks like there are probably a lot of pegs out there that would fit our bikes.

I ended up using the pins and springs from the WR250X and the pegs from the YZ.

Hope this helps

YZ125/YZ250/YZ250F/YZ450F 05-07 titanium pegs do fit. Needs the YZ springs. Pegs won't fold all the way up, bolt is in the way. Overall a good choice compared to other aftermarket alternatives.