Yosh RS-4

Anyone ever seen one of these in person or is anyone running one of these? They look very nice..




http://www.yoshimura-rd.com/p-5074-rs-4-stainlessstainless-slip-on-wr250r.aspx

I am currently looking into one. My problem is getting one in Canada. Will keep you posted as to how I make out.

Perfect. Thanks!

Wow that looks nice. I like the guard. I made this for mine but not until after I burnt a hole in my over pants. Hopfully its not as loud as the yosh. I have.

I'm really thinking about getting a RS4. What programmer are you using with it?

I was thinking of trying the Yamaha Pim2.

Not sure if you guys noticed the note on the site for that pipe but it says:

"For Closed Course Competition Use Only. Not Intended for Street Use."

Would that because of noise levels, or what?

saddletramp wrote:

Not sure if you guys noticed the note on the site for that pipe but it says:

"For Closed Course Competition Use Only. Not Intended for Street Use."

Would that because of noise levels, or what?

I think all aftermarket pipes say that. An aftermarket pipe removes the catalytic converter, and they are also louder. Anytime you mess with OEM emissions, the bike is no longer certified. A manufacturer could go through the process of getting their pipe registered with the EPA and certified and all that, but it is too costly. There is some talk of legislation making it a ticketable offense if the pipe doesn't have an EPA stamp on it, but in general most people don't have any problems.

IAmABug wrote:

I am currently looking into one. My problem is getting one in Canada. Will keep you posted as to how I make out.

Did you get one?

No I have not. Can't find anyone in Canada that can ship it/get it for me. As for the 'noise', every aftermarket pipe says "for close course competition only".

I'll email Yoshimura and see what they say.

mix123 wrote:

I'll email Yoshimura and see what they say.

Did you ever find out more info on this? I email them to but they sent me a company from the US to go through. And they don't ship to Canada either. I don't know why Yosh can't just ship me one.

*Shrug*

Sweet pipe, I have one (previous model RS-2). With FMF programmer. Loud enough to keep driver's attention while commuting.

Doesn't this one at Amazon ship to Canada?

Nice pipe btw.

On a side note, I am seriously considering a PO box across the border.
Not only is it ridiculous that we are not allowed to buy a specific items, they usually gouge us on shipping/brokerage/customs too.

Ships to Canada= http://www.discount-moto-direct.com/yoshimura-rs-4-exhaust-stainless-stainless-slip-on-yamaha-wr250r-2008-2012/

Quote :

** Shipments to Canada are treated as all the other international shipments. It is the customer's responsibility to pay all the applicable duties, taxes, & brokerage fees imposed on the import shipments by the Canadian government

I have one on my bike. I bought the bike used and it had all the goodies on it. It also has a Dynojet PC5 with the auto tune.

Found this on ebay
http://www.ebay.co.uk/itm/YAMAHA-WR250R-WR250X-08-09-10-11-12-YOSHIMURA-RS2-SO-SS-AL-EXHAUST-1330-02D520-/161003574212?pt=Motorcycles_Parts_Accessories&hash=item257c8f93c4

brianengy wrote:

I have one on my bike. I bought the bike used and it had all the goodies on it. It also has a Dynojet PC5 with the auto tune.

isn't that the RS-2?

Yep that's the RS2 not the RS4. The RS4 has a side exit and carbon fibre tip.

Got a good review on Amazon so I thought I'd go for it.

I just ordered mine from DMD to ship to OZ. Will post pics and a review when it lands.

Have it yet?

Yep. Landed last week but I was away. Well packed and comes with everything. Hose clamps, spring puller. Even an exhaust bung for when you wash the bike. Gotta love Japanese quality. Still flat out at work so will get it on ASAP and post a review after a test ride.

34wrc wrote:

Yep. Landed last week but I was away. Well packed and comes with everything. Hose clamps, spring puller. Even an exhaust bung for when you wash the bike. Gotta love Japanese quality. Still flat out at work so will get it on ASAP and post a review after a test ride.

any feed back on this one my fmf fell apart on me looking to replace it with this one what header you using? thanks.

Well I hate to thread jack but my pipe is up for sale. Its BRAND NEW, NEVER FITTED.

Need some parts for my rally car so never even got fitted to the bike.

Asking $350 AUD. Will post my own thread with pics soon.

PM or SMS 0422 068 141

Its in WESTERN AUSTRALIA and NO OVERSEAS shipping....

Sorry guys....

I have just received a Power Commander V and i was hoping to receive my Yosh Rs-4 today but it hasnt been delivered yet, expected delivery date changed to monday. going to be a sad boring weekend, i was excited to install it. hahaha

There is a website in Canada that sells them. http://www.canadasmotorcycle.ca/
little bit slow processing or i'm just too anxious i ordered last Thursday and got conformation the Monday after, along with a tracking number

I havnt seen a picture with a black 250x at all, seems like hardly any poeple have bought this pipe?

Went and picked it up at the post office.

And opened it up to find my worst enemy, packing peanuts   LOL


1 Big red but plug or whatever you wanna call it lol, stickers and the hardware pack.



The heatshield, I honesstly thought it was going to be carbon fiber, and was kinda disappointed. brushed stainless?

Everything that was included. Nice pieces for sure.

I Hate where companies put these stickers!...

Now the exhaust, unfortunately its -27*c here no way im going to work in that, even in the garage cause its not heated. this Thursday it gets nice like -3 or something

I cant wait to see it on the black wr250x its going to look awesome.