Upgrading Fork Springs

Subject: Upgrading Fork Springs Mon Jun 13, 2011 8:23 am

Who has replaced their fork springs and what kind did you replace them with?

Alpha Rider

I put in a shorter set, IIRC they were 4.5 .

_________________
A wolf's voice echoed down the mountain 'Share the bounty of the hunt with your brothers and sisters, and forever be strong and free.' Upgrading Fork Springs Wolf_b10

Subject: Re: Upgrading Fork Springs Mon Jun 13, 2011 9:41 am

I obviously don't want shorter ones. But I am having an issue finding the right length. I need a heavier spring and the ones I have found are longer than the stock springs.

Subject: Re: Upgrading Fork Springs Mon Jun 13, 2011 4:16 pm

I would give either Fastbikeindustries or Go Race a call and talk to them about springs.
Both shops have good knowledge of our suspension.
I know Dave at FBI is easy to talk to.

Subject: Re: Upgrading Fork Springs Sat Jul 30, 2011 7:20 pm

I cut a couple of coils (1.8) off mine to stiffen them up. I know this confuses people, but I know what I'm doing. Spacers, of course, make up the differance in length.

» Cut Front Fork Springs?
» Anyone tested Hyperpro fork springs
» Upgrading WR250R Suspension
» Do i need to remove the fork damper rod to replace fork seal
» Eibach Springs, 0800.250.0600