I need to remove the stock chain on my 2009 WR250X. Does the stock chain have a master link or do I just randomly pick a link and grind down the pins until it falls off?
RattTongue
Subject: Re: Remove chain Wed Mar 28, 2012 4:28 pm
I just used some decent sized bolt cutters on mine.
motokid Moderator
Subject: Re: Remove chain Wed Mar 28, 2012 4:34 pm
Subject: Re: Remove chain Wed Mar 28, 2012 5:11 pm
I used a Dremel and ground the pins flush then used a punch to drive them out. This way you can use a masterlink in place if you ever want the old chain again.
pbnut
Subject: Re: Remove chain Wed Mar 28, 2012 5:28 pm
I didn't cut anything. I just took it off when I did my gearing change and rear suspension re-grease. No swingarm, no problem.
Arkmage
Subject: Re: Remove chain Wed Mar 28, 2012 5:30 pm
pbnut wrote:
I didn't cut anything. I just took it off when I did my gearing change and rear suspension re-grease. No swingarm, no problem.
Same here. Made since to do the suspension maintenance at the same.
anoldsman
Subject: Re: Remove chain Thu Mar 29, 2012 1:34 pm
Thanks for all of the help guys!!
saddletramp
Subject: Re: Remove chain Thu Mar 29, 2012 5:55 pm
I second the idea of combining two jobs: 1- Take swingarm off and service bearings and grease shafts 2- While swingarm is off you can remove the chain without having to break it apart.
Should take not much more than an hour and a half, so maybe just a two beer job.
Arkmage
Subject: Re: Remove chain Thu Mar 29, 2012 6:16 pm
Mine took 10 days but that's cause I sent the rear shock to FBI while I had it apart ;)
*edit* it should be noted that the 10 days was not due to FBI but UPS.