Exhaust clamp

I just installed my GYTR mufffler the other day but it did not have any clamps to attach it to the header pipe.
Shoud it have one?
The stock clamp was too big for it and cannot be used.
Thanks for any info guys.

Most AM pipes don't come with them. It would be a nice extra to have, being the clamp is an extra security against pulling apart and leaking.

Thanks Shewolf I thought it wasn't ment to come with a clamp but I will proberly put one on anyway.

My GYTR muffler came with the following:
fiberglass/metal gasket (stock WRR/X exhaust gasket),
longer mounting bolt (the GYTR muffler hanger is thicker than the stock one),
pipe clamp,
and of course, some instructions.

The International bike's GYTR pipe must be diffrent from the North American one as mine only fits on without the gasket and the instructions say to just slide it on over the header. I put a clamp just like yours on just to be safe.

My pipe came with a longer bolt like yours, instructions and the torx wrench needed to change the packing.

Here's a list of all the diffrences between the international and North American GYTR:
1. O₂ sensor plug
2. Fits directaly on header (no gasket)
3.No spark arrestor (I might have to make one)
4. Diffrent end cap

I found the clamp kit after I installed the pipe. (Yes, I'm a man and never read directions).

I used a hose clamp. Lighter weight.