HYDRAULIC REAR BRAKE LIGHT SWITCH

Replaced my stock antique rear brake light switch with a Vortex Hydraulic switch . Got a 10mmx1.25mm pitch switch . Installed it in place of the stock rear master cylinder banjo fitting connected the 2 wires nice. A half hour job .Saves 4 ounces.

Picture link:

https://i.servimg.com/u/f61/14/01/51/56/bike_p12.jpg

Can't do pictures. Look at or post a picture of a Vortex Hydraulic Brake Light Switch. Imagine the rest.

Retain your brake light functionality with rear brake with this
hydraulic brake pressure switch with 1.25 thread pitch. Fits nearly
every Japanese bike. Simply unscrew the banjo bolt in the top of the
master cylinder and thread the switch in; then connect wires
accordingly.

Looks like an easy and not-too-expensive fix, esp if we need to lower the pedal

Pics of it installed on the Yammi please

Nice picture .

Edited first message with a picture.

did this hydro switch on rear caliper; worked ok