PC3 Compatibility

Subject: PC3 Compatibility Sun May 27, 2012 5:28 pm

Will a PC3 work on a 2011 WR250R?

DynoJet lists the PC3 for the 2008 model year, but from 2009 on it only lists the PCV. Are they just pushing the newer PCV or is there a compatibility issue with the PC3 for the 2009-2011 WR250R's?

Moderator

Either model of Power Commander will work on any model year of Yamaha wr250x/r

There is no difference in any model year of motorcycle other than color choices and a rubber gasket on sprockets and a bad fuel pump on some bikes during 2008.

PCIII or PCV will work on any model year of X or R.

_________________
2008 WR250X
Gearing: 13t - 48t
Power Commander 5 / PC-V
Airbox Door Removed - Flapper glued - AIS removed
FmF Q4
Bridgestone Battlax BT-003rs

Subject: Re: PC3 Compatibility Sun May 27, 2012 7:42 pm

Thanks for the information!

Subject: Re: PC3 Compatibility Tue May 29, 2012 4:12 pm

The PC3usb listed for the 2008 WR250 (432-411) should work fine on the newer model years of the bike model.

Let me know if you have any further questions.

Regards,

Chris Kelly

Dynojet Research Inc.

2191 Mendenhall Dr. Suite 105

North Las Vegas, NV 89081

1-800-992-4993

» ECU compatibility
» Clutch cable compatibility
» Brake & clutch lever compatibility
» Scotts Damper Version Compatibility
» Yamaha rear rotor compatibility (WRR)