Footpegs for WR250R

Greeting to all enduro riders,

Stainless steel footpegs for  WR250R

Types for order:

A)-5mm lower = 0 set in stock (10.07.2017)


B) -5mm lower and -10mm back moved = 0 set in stock (10.07.2017)


C) -20mm lower and -25mm back moved = 0 set in stock (10.07.2017)


If you are interested write me PM
or use my private email:
bosley [at] centrum [dot] cz
subject: Footpegs

For produce need 2-3 business days...
But I have some unfinished orders before you...

THANK YOU FOR WATCH THIS POST

Hi,
the dirty WRR is mine , the Footpegs are perfect for me (5mm lower) & Radan is absolut reliable.
The first pair didn´t fit & he sent me another pair for free!
Respect.

Greetz Bubbler

Are these larger than stock, and what is the price for the wr250r?
Thanks

Bosley,

I may also be interested in a set for the WR250R. I am curious as to the reason the later version has two rows of teeth whereas the earlier design had three rows. Is there a technical reason for that? If I wanted to order a set from the latest design but with three rows of teeth is that possible? If so, what would be the costs for a set of two footpegs?

I may be interested in a pair for my WR250R, but I have a question.
I need my pegs lower and about an inch rearward.
I am too far forward and over the handlebars when standing.
Is that possible to design/fab?

Rapid Dog wrote:

I may be interested in a pair for my WR250R, but I have a question.
I need my pegs lower and about an inch rearward.
I am too far forward and over the handlebars when standing.
Is that possible to design/fab?

Hi rapidDog

INCH = 25,4mm it is too much = totally off axis mounting (not possible = would not work tipping)
My design is -10mm it is not enough for you?

bosley1980

PM'd ya

how much are they

..Great work Rad, can't wait to see how they work out!

Rapid Dog wrote:

..Great work Rad, can't wait to see how they work out!

YES, ME TOO.
I hope that the package will arrive even before Christmas

Pegs are on. Note that these are from my design and request, about an inch bak and lowered a few MM's.
So far so good. Excellent craftsmanship.





Tested...

Another type footpegs for WR250R - 3ROWS (customer from Canada)








Polishing is still missing from the inside

Looking good Radan. I can hardly wait to receive them. Will post some photos when I get them installed.

Page after page after page and still no link, price, or order info here. Are you just teasing us or whats going on here?

I installed my new pegs today although, as you can see from a couple of the photos, I will not be riding for at least six more weeks. I have not been able to ride with them yet but I am very impressed with the quality of the product and the client service. From the posts above it is evident that some folks are cautious about dealing with this vendor. I can only share my story.

Initially I asked a question or two via PM to the vendor. He responded to my questions within 24 hours and asked that I use email to contact him as it was most efficient. To be honest I, like some of you, was skeptical but after a few email responses I decided to take a chance and trust the vendor. After agreeing as to what I wanted in the pegs ( -5mm, 3 rows of teeth) Radan (vendor) sent me CAD pdf files of the pegs. Upon my approval of the drawings he fabricated the pegs within 4 days. He then sent me photos of the finished product. On Feb 7, after seeing the photos, I sent full payment to him via Paypal. The following day, he received the paypal payment, mailed me the pegs, and sent me the postal tracking number. The vendor is in Chezch Republic and I am in Canada. I tracked the product as it came into my country and through Customs, and then Canadian postal service to my house. I received them on Feb 20 therefore just less then two weeks to get from Europe to my home. I inspected the pegs and was very satisfied with them. Today, Feb 25 I got a chance to install them. Took me about half an hour as you have to do loosen up the brake lever to get the pin out of the old pegs. Wheeled the bike outside for a photo and put it back in the garage to await its annual teardown, greasing frenzy next month. Overall I am very satisfied with the purchasing experience and can hardly wait to put the pegs to use.

Here are the photos:

saddletramp wrote:

I installed my new pegs today although, as you can see from a couple of the photos, I will not be riding for at least six more weeks. I have not been able to ride with them yet but I am very impressed with the quality of the product and the client service. From the posts above it is evident that some folks are cautious about dealing with this vendor. g]

How much did they cost?
How much was shipping (I'm in Canada too)?

Sent you a PM

Hello everyone,

I have TODAY 2sets produced

1set - s/n 42 SOLD
1set - s/n 43 SOLD
here pictures for a demonstration


IT IS A SAME TYPE AS A)-5mm lower the only difference is that the third rib added.

I am a fabricator also and these pegs are good grade stainless and Tig Welded and not Mig (wirefeed) like a production peg would be! For him to go thru and make a CAD drawing for a one-off pair of pegs and have a customer approve it and then produce a set and get them to a customer on the other side of the planet is record time in my book! GREAT JOB! If I didn't make my own stuff also I would for sure buy these pegs!

MJ

BAJAMARKO wrote:

I am a fabricator also and these pegs are good grade stainless and Tig Welded and not Mig (wirefeed) like a production peg would be! For him to go thru and make a CAD drawing for a one-off pair of pegs and have a customer approve it and then produce a set and get them to a customer on the other side of the planet is record time in my book! GREAT JOB! If I didn't make my own stuff also I would for sure buy these pegs!

MJ

For you, I also made Footpegs too​​?

No! But if I did need some YOURS would for sure be at the TOP of my list! VERY good looking PEGS! I appreciate good workmanship!

BAJAMARKO wrote:

No! But if I did need some YOURS would for sure be at the TOP of my list! VERY good looking PEGS! I appreciate good workmanship!

I thank you