Footpegs for WR250R

i seemed to have stumbled across some money for a modification recently and im interested in knowing price + shipping. if you could PM with details i would greatly appreciate it!

cdifpsycho wrote:

i seemed to have stumbled across some money for a modification recently and im interested in knowing price + shipping. if you could PM with details i would greatly appreciate it!

I send you PM

After bending up my stock pegs, I'm in the market for some new pegs. Your "type B" -5mm and back 10mm look just like what I am looking for. Please send me a message.

I'm completely stoked about my new pegs! Great Build Quality and way toughter than the stock pegs.

bosley1980,

The pegs were well made and i don't have to worry about bend pegs anymore.

The pegs are lower than stock which has implications for your riding foot positions.

1) It is easier to change gears with my sidi crossfires as there is more space.

2) The wider pegs than stock, gives a better placement for my feet in standing position.

3) The rear brake is higher than the pegs (my brake lever has already been set to its lowest), which makes it harder to tap the rear brake, as i have to lift my right foot higher.

2 out of 3 is pretty good, definitely value for money for a well made product.

Maybe I should contact the NSA so we can find out the PRICE and SHIPPING COST.

Prairieparson wrote:

Maybe I should contact the NSA so we can find out the PRICE and SHIPPING COST.  

YOU HAVE PM

Hello,

I'm interested to know how the pegs for RapidDog worked out, the ones that were extremely down and back?

Can you send me a PM or email (elig@sent.com)?

Thanks!

xaman wrote:

Hello,

I'm interested to know how the pegs for RapidDog worked out, the ones that were extremely down and back?

Can you send me a PM or email (elig@sent.com)?

Thanks!

Hello Xaman,

I'm sorry, but I have no feedback.
Many customers no response, no photos even short message write to me if package arrived.
write PM to him, I don't help you with this.

Can you PM me the price for 3-row standard offset pegs shipped to Florida, USA?

Just have to say what great service I've received from Radan. I ordered a set for my wr250 on 25th February and they arrived 3rd March . Great quality, great service, great price, what's not to like?

I sent you a PM about a set of lowered pegs :)

Radan
I received my 5mm lower, 10mm back pegs today   Installation went fairly smoothly. The only issue I had was the rear brake pedal made getting the right side pin out a bit difficult, but nothing to do with the foot pegs. Probably should have removed it but I was anxious to get the pegs on and won out eventually. I can already tell the lower, further back pegs are going to give me a more comfortable position. I'm 6'3" with a size 12 boot and the extra room is going to help me with both the shifter and brake pedals. I'm also digging the added width of the pegs. I think this is going to make standing more comfortable and stable feeling. If anyone is on the fence about these pegs, I can say that my experience was incredibly positive. The entire process was handled professionally, quickly and with constant updates on the progress of the pegs. I was sent a tracking number once the pegs were shipped out and they arrived a lot sooner than I expected. The pegs themselves look great, bolted up perfectly and the craftsmanship is top notch. I'll get some miles on them this weekend and will try to report back with my impressions and maybe even a picture or two. Radan, thanks for making such a great product and offering it at such a great price.
Cheers,
Brent

Order specifikation from US customer :
YAMAHA WR250R
Footpegs:
- wide
- 15-20mm lower
- backward as standart





here is result video


Realization:


HERE IS PICTURES FROM CUSTOMER



customer wrote:
"I got the lowered pegs installed and out for a ride today. They are AWESOME!  Thank you so much. I'm very happy."
"I got to do a linger ride this weekend and test things better.  I'm MUCH more comfortable both seated and standing with these pegs.  "

THANK YOU  

Hi would like to know price and if shipping is possible to Perth Australia? 20mm lower 25mm back. cheers

This guy stands behind his products, If you're are even thinking about getting these pegs DO IT! You will not regret it, great product and great service.

Thanks again, Radan!

Protosouls wrote:

Any body else have an issue with the welds? My left side foot peg is coming part at one of them.... Maybe I'm too fat....?

Send picture this interests me what's bothering you!

NEW MODEL FOR YAMAHA WR250R
Toothed parts are made from 4mm sheet metal




In the future which better with a rod or toothed struts?

I think the rods would work better. Also the center toothed strut could be slightly higher than the edge struts. This would aid the foot to roll forwards and backwards more easily.

sorry i may have missed it. but how much are these? they look great.

michiko wrote:

sorry i may have missed it. but how much are these? they look great.

Same question for me. How much to Australia?

I think you need to PM the OP for pricing and payment details.

dhally wrote:

I think you need to PM the OP for pricing and payment details.

I write you PM
is NOT PUBLIC
if anyone need to know price, I write PM

When I'd always wanted to images after installation, it is very difficult to regain. Then new customers have no idea about, and I would like to complied them.
This customer has fulfilled what I asked him and photos are really nice.
So I have to share with you.















Thank you "Mikkila"