Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  CalendarCalendar  FAQFAQ  SearchSearch  MemberlistMemberlist  UsergroupsUsergroups  RegisterRegister  Log inLog in  
WR250R/X Forum

Share | 
 

 headlight wiring question SOLVED!

View previous topic View next topic Go down 
AuthorMessage
cibo




PostSubject: headlight wiring question SOLVED!   Wed Mar 23, 2011 11:32 pm

Finally, finally i purchased my wr. got a great deal on a 08 wr250x in great shape. BUT, the PO decided to be motardy and replaced the front and rear lights assemblies with "street mod" cheapo LEDs. I'm going to revert to the original headlight and taillight.

So here's the rub. Took the crappy headlight off and lo and behold, a bundle of wires to the headlight, no plug. I've got two yellows, a black and a green. I bought a three pronged plug for the stock headlight. From the service manual it looks like it's just a matter of figuring out which wire goes in what hole. BUT, what do i do with the two yellow wires (hi). do i just use one yellow or combine them and then crimp to the plug?

i'm an electrical dumbass, so any help is much appreciated.

Back to top Go down
 
headlight wiring question SOLVED!
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Wiring Question
» Off topic Kawasaki speedo question (SOLVED)
» Kohler CV13 wiring question
» License plate light wiring question?
» RELAY WIRING QUESTION

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: