Tubeless conversion?

I am looking at this... OUTEX



By using these:



and these



They can convert the stock DID rims to TUBELESS~



Estimated cost of conversion will be SGD400... which is way way way cheaper than a set of mag rims or other branded ones... and the feedbacks are pretty decent...

Will report back once it's time to change the tires on my X

Oooooooh! It comes with rubber gloves! KINKY!

Looks interesting mtb. Let us know if you do it.

Well, it certainly would make a difference with flats; all you'd need is a can of that elephant spooge if you got a hole instead of having to rip the tube out, patch it and slap it back together.

SheWolf wrote:

Well, it certainly would make a difference with flats; all you'd need is a can of that elephant spooge if you got a hole instead of having to rip the tube out, patch it and slap it back together.

My reservation would be probable tearing of sealant when spoke nuts are turned during spoke tension adjustment.

Might want to check out ThumperTalk thread on "Nuetech Tubeless System".

There is a product for Bicycles. Anytime the wheel needs to be trued or spoke tension adjusted one must remove the system! Works very well on bicycle rims!

If you contact the guy he may make something for Motorcycles also!

http://www.notubes.com/tubeless_system.php