Lowered my Rear Brake Pedal

thanks to David @ FBI he hooked me up with clevis which makes me able to adjust the pedal from stock height to this low, which puts the top of the brake pedal flush with the bottom of the footpeg.








notice here when stock where the top of the brake pedal is compared to the clutch cover





this is his webiste http://www.fastbikeindustries.com/

Far out!!!!

The only difference is the clevis? Nothing else?

Looks like it lowered the front of the lever by almost an inch, if not more.

Do you mind providing a price for that little goodie?

oh, very nice .. im interested in this too!

Check it out:
MX-BC006-MB <-- linky
$45 + S&H


Don't be confused by the lower Suzuki reference - the same part fits multiple bikes.

Schhhhweeeeet....

She's been complaining about that problem since we got "Yannie".

The girl is going to love me. Again.

Yeaup that's it, just swap out the clevis, took me about 5 min. Awesome mod by far!

OK Guys, correct me if I'm wrong but instead of replacing the clevis couldn't you increase the length of the all thread for a fraction of the cost and come to the same result?

actually you could just get a thinner locknut. the pedal has to go up closer towards the master cylinder. plus i like the blue farkle!

Thanks.

Thanks.

you guys must be out of your mind to pay $45 for that piece. take the stock nut off and grind it down to half the stock size put it back on and your good, freebie!! my pedal is a little lower than my peg now.

I'll bet your clevis isn't pretty blue

haha nope itll end up black when i powdercoat a bunch of random small pieces

Do you have to adjust the brake light cable if you lower the pedal?

And why is it so high in the first place?