Welcome to the WRR/X Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.
Welcome to the WRR/X Forum

A place to share your passion for the WR250R/X!
 
HomeHome  Latest imagesLatest images  SearchSearch  RegisterRegister  Log inLog in  
WR250R/X Forum

 

 Dead spot right at the bottom end

Go down 
4 posters
AuthorMessage
RT3856

RT3856



Dead spot right at the bottom end Empty
PostSubject: Dead spot right at the bottom end   Dead spot right at the bottom end EmptySun Mar 28, 2010 7:46 pm

On my 08 WRR right off idle there is a dead spot. Once I give it gas it hesitates then goes.
Right now iI have the air box flapper glued open and all the EPA stuff disconnected and removed.
The only other thing is an FMF Q4 muffler.
FMF programmer comming as soon as the budget allows.
Any suggestions or anybody have this same issue?
Back to top Go down
lotsofwheels





Dead spot right at the bottom end Empty
PostSubject: Me too   Dead spot right at the bottom end EmptySun Mar 28, 2010 8:28 pm

Mine is completely stock and I have the same problem. I didn't notice the hesitation when I got the bike but it seemed to develop about 1000 miles later. I'm content with the stock horsepower, but I'd sure like to be able to get rid of that hesitation without having to buy a programmer since money is kind of tight right now.
Back to top Go down
greer





Dead spot right at the bottom end Empty
PostSubject: Re: Dead spot right at the bottom end   Dead spot right at the bottom end EmptySun Mar 28, 2010 8:41 pm

Mine did the same thing, programmer worked a miracle for me. I lucked up and found a used FMF unit, but I'd consider a new one worth every penny. You all got anything you can pawn? Just kidding, I know how it is to be tight on money. But a programmer belongs at the top of the goodies list, in my opinion.

Sarah
Back to top Go down
SheWolf
Alpha Rider
SheWolf



Dead spot right at the bottom end Empty
PostSubject: Re: Dead spot right at the bottom end   Dead spot right at the bottom end EmptySun Mar 28, 2010 9:04 pm

The programmer smartens the bike up a fair deal, even without the pipe. Smooths a lot of the 'ticks' that seem to come with a new stock setup. Dead spot right at the bottom end 61865 If you've eliminated all the emissions crap, opened it up and don't have the programmer, it's running real lean...the bike already runs lean from the crate.

_________________
A wolf's voice echoed down the mountain 'Share the bounty of the hunt with your brothers and sisters, and forever be strong and free.' Dead spot right at the bottom end Wolf_b10
Back to top Go down
RT3856

RT3856



Dead spot right at the bottom end Empty
PostSubject: Re: Dead spot right at the bottom end   Dead spot right at the bottom end EmptyMon Mar 29, 2010 12:59 am

SheWolf wrote:
The programmer smartens the bike up a fair deal, even without the pipe. Smooths a lot of the 'ticks' that seem to come with a new stock setup. Dead spot right at the bottom end 61865 If you've eliminated all the emissions crap, opened it up and don't have the programmer, it's running real lean...the bike already runs lean from the crate.
I appreciate the input, programmer will be the next thing coming.
Now I wonder, am I doing damage riding the way it is?
When I got the bike "used" the original muffler didn't come with the bike, it had the DRD and I changerd it out for the FMF.
The power is fine with me accept that hesitation. I do a lot of tight woods.
The stock gearing is fun cause it encourages me to keep a good pace in the woods eeek
Back to top Go down
SheWolf
Alpha Rider
SheWolf



Dead spot right at the bottom end Empty
PostSubject: Re: Dead spot right at the bottom end   Dead spot right at the bottom end EmptyMon Mar 29, 2010 9:56 am

Well...I know of some guys who ride it piped and whatnot without the programmer...I was told by Yamaha that with the stock settings already lean, running it perf'd without some form of fuel programmer will lean it out a lot more and the risk of doing serious damage (something they said could easily happen) was something I didn't want to entertain. Dead spot right at the bottom end Suspect

_________________
A wolf's voice echoed down the mountain 'Share the bounty of the hunt with your brothers and sisters, and forever be strong and free.' Dead spot right at the bottom end Wolf_b10
Back to top Go down
Sponsored content





Dead spot right at the bottom end Empty
PostSubject: Re: Dead spot right at the bottom end   Dead spot right at the bottom end Empty

Back to top Go down
 
Dead spot right at the bottom end
Back to top 
Page 1 of 1
 Similar topics
-
» LED Spot Lights
» Spot Satellite Messenger
» GPS/Holders
» Maintenance mishaps... Shotty spot welds?
» Flat spot advice for a relative newbie

Permissions in this forum:You cannot reply to topics in this forum
Welcome to the WRR/X Forum :: Technical :: General Maintenance Discussion-
Jump to: