Anyonne know how to make a light switch????

I would like for there to be a way to turn off all my lights when i want to.

I searched on here and couldnt find anything.

I know alot of yous know alot about electronics so my question is, How hard would it be???

Im no expert but seems like your probably going to need at least two on/off switches; one switch to turn off the headlight and the other to turn off the tail light. your front blinkers/running lights can be turned in to blinkers only, so you wont need a switch for those. to wire up the on/off switches, i guess you would find the positive wires to both your headlight and tail light and put an on/off switch in line. Someone else might have a more creative/expert way to do it, but thats probably what I would end up doing. I did something like that with a pair of LED's I installed on my bike. I have two on/off switches wired to each so I can turn one or both on/off (I used the positive wire from the license plate light so they only get power when the key is on).

Very easy, just did it last week, check out this thread https://wr250rforum.forumotion.com/t4620-turn-off-headlight

Just break the rear light and the front light and wire them to a single switch. I have a diagram I'll send over for the stock wiring, I have a DRC Edge on the back.